domenica 24 marzo 2013

Copia di una storica maniglia- Copy of an old handle - Копия старой ручкой

Una decina di anni fà, era l'anno 2000, abbandonata, in una fonderia, ho trovato


un impugnatura di una grande maniglia per portoni del passato.
Probabilmente, era già una copia, ma ancora in discrete condizioni.
Un impugnatura per una maniglia non serve a nulla, sè non ha una placca o una rosetta di fissaggio.






Nello stesso periodo, forse anche per caso, mi sono imbattuto  in una placca,
di grandi dimensioni,fissata su un portone antico, che faceva il caso mio.
La placca è molto sottile  prodotta da una lama di ottone, perciò ho pensato
di aumentare lo spessore e fondere.

Col aiuto di un modellista, abbiamo realizzato il modello e fusa

La maniglia, messa in esposizione presso la ferramenta famigliare, ha attirato l'attenzione
di una signora, alla quale la maniglia piaceva, ma desiderava la stessa con rosetta.

Contattai il modellista e dopo alcuni tentativi, siamo riusciti a individuare il modello,
che soddisfava tutti.

Caratteristiche per produrre una maniglia in ottone.

La prima cosa, da fare è produrre le anime in sabbia per il quadro centrale da 8 mm.

Poi passiamo nella parte fonderia,  veranno prodotte le impronte dello stampo e
 versato al interno il metallo  fuso.

La parte successiva è  impegnativa, sgrezzatura iniziale, limatura delle parti di metallo in


eccesso con eliminazione del metallo sulla mezzaria, foratura -dove richiesta e filettatura
per la sistemazione del grano di blocco maniglia-quadro.










Ora si passa alla pulizia finale

Il metallo ha un infinita di punti e di striscie superficiali, che devono essere completamente
rimosse per ottenere una superficie a specchio.
La fusione, sbavatura e lucidatura sono 3 processi importantissimi per raggiungere
alta qualità della maniglia.
Notiamo subito, sè un processo produttivo non è stato rispettato e seguito nei minimi dettagli.



 Peso della maniglia impugnatura e placca  grammi 1120, completa grammi  2240




A decade ago, it was the year 2000, abandoned in a foundry, I found
 a handle of a large handle for doors of the past. 
May even have a copy, but still in good condition. 
A handle to handle is useless, itself has a plate or a rosette fixing.


At the same time, perhaps by chance, I came across a plaque, 
large, fixed to a gate of the old, which was my case. 
The plate is produced by a very thin blade of brass, so I thought 
to increase the thickness and melt. 
With the help of a modeller, we developed the model and merged 
The handle is put on display at the hardware family, has attracted the attention 
of a woman, to which the handle like it, but wanted the same with rosette.
I contacted the modeller and after a few attempts, we were able to identify the model, 

that found to meet all.
Characteristics to produce a brass handle.
The first thing to do is to produce the sand cores for the center console to 8 mm. 

Then we go in the foundry messages will be produced fingerprints of the mold and
paid to the internal molten metal. 

The next part is tough, sgrezzatura initial filings of metal parts in
 with removal of excess metal on the center line, drilling and thread-where required 
for the accommodation of the locking dowel handle-framework.
 Now we move on to the final cleaning 
The metal has an infinite number of points and surface strips, which must be fully 
removed to obtain a mirror surface. 
The merger, deburring and polishing processes are 3 very important to achieve 
high quality of the handle. 
We note immediately, itself a production process was not respected and followed in detail





 Десять лет назад, это был 2000 год, брошенных в литейном цехе, я обнаружил, 
 Ручка большая ручка для двери в прошлое. 
Может даже есть копия, но все еще в хорошем состоянии. 
Ручка для обработки бесполезно, сама по себе имеет пластины или розетки крепления.



 В то же время, возможно, случайно, я наткнулся на доску, 
большие, фиксированные в ворота старого, который был мой случай. 
Пластина производится очень тонким лезвием из латуни, поэтому я подумал, 
для увеличения толщины и расплавиться. 
С помощью модельер, мы разработали модель и объединены 
Ручка выставлены на аппаратном семьи, привлекла к себе внимание 
о женщине, к которой ручка нравится, но хотелось то же самое с розеткой.
Я связался с модельером, и после нескольких попыток, мы смогли определить  

модель, что нашел для удовлетворения всех.
Характеристики для производства медной ручкой.
Первое, что нужно сделать, это произвести песчаных стержней на центральной

консоли до 8 мм. 
Тогда мы идем в литейном сообщения будет производиться отпечатки пальцев формы и
уделяться внутренним расплавленного металла. 

Следующим важным моментом является жестким,    начальных заявок металлических
деталей в  с удалением избытка металла на центральной линии, бурение и потоков в 
случае необходимости  для размещения фиксирующего штифта ручки-рамки.
Теперь мы переходим к заключительной уборки 

Металл имеет бесконечное число точек и поверхности полосы, которые должны быть полностью удаляют для получения зеркальной поверхности. 
Слияние, удаление заусенцев и полировки процессов 3 очень важно для достижения 
Высокое качество ручки. 
Отметим сразу, сам процесс производства не уважать и соблюдать подробнее




 

Nessun commento:

Posta un commento